Raven Spirit Dispenser 30ml
Simple spirit dispenser design, only requiring a small mounting bracket, the raven spirit dispenser unit supports the weight of the bottle, requiring no further bottle support like other spirit dispenser models. This unit will take bottles up to 1.125L in size, with the ability to take thick liqueurs and thin spirits unlike other spirit dispensers on the market.
Warning: Last items in stock!
Raven Spirit Dispenser 30ml, Wall Mounted, Black
The Raven Spirit Dispenser is a very simple spirit dispenser design, only requiring a small mounting bracket, the raven spirit dispenser unit supports the weight of the bottle, requiring no further bottle support like other spirit dispenser models. We see the Raven Spirit Dispenser as of commercial grade, although is not certified from weights and measures for trade use. This unit will take bottles up to 1.125L in size, with the ability to take thick liqueurs and thin spirits unlike other still spirit dispensers on the market. This unit was originally designed to cater for the Monin Syrup Range we have imported from France, with its ability to dispense syrup with its large opening whilst being very accurate and reliable. We have been selling these units for over 10 years, with very high quality parts. With cheaper Chinese models entering the market with quality control issues, the ravens are becoming increasingly attractive as they rarely require servicing, but if required as simply swap and go bowl units.
If you are going to put a $40+ of spirit in a dispenser, you want it not to leak, avoid the cheaper Chinese dispenser models
Available in 30ml and 15ml interchangeable measure bulbs
Requires no bracket to hold bottle
(Please take into consideration bottle size - Bottle neck will insert 35mm into the unit)
Back Surface Height 115mm
Depth Excluding Bracket 100mm
Depth Including Bracket 115mm
Depth Including clip: 19mm
Depth Excluding Clip 15mm
Total Depth Including Screws 35mm (12mm penetration into mounting wall)
W90mm D100mm H145mm
Screw mounting plate to a bracket or wall
Align dispenser with mounting bracket and pull down until latched together
To remove housing from the back plate, insert swizzle stick or similar in between back plate and housing at the top of the unit, this will unlatch the unit.
Remove bowl by pressing the silver button and rinse bowl in warm water
Depress silver button on the front of dispenser until distinct "click" is heard
Lift bowl from dispenser body and fit to upright bottle
Release pressurised air by moving valve lug downward (Important)
Invert bottle and bowl and place into the dispenser body
Tilt the bottle lightly forward until distinct "click" is heard
Hold glass under dispenser outlet
With free hand lift finger lever to upper most point
Hold until the bowl is emptied and drips have ceased
Release finger lever
Bottle Removal / Replacement
Hold the bottle firmly with one hand
Depress the silver button on front until a distinct "click" is heard
Place free hand on bowl and lift bowl and bottle together
Remove bowl from empty bottle and rinse or clean as required
Fit bowl to new bottle and release air pressure (Important)
Return to dispenser body as per bottle loading instructions
Remove bowl as per bottle removal instructions
Run bowl under warm water and wipe down
Open the valves by lifting valve lugs and run warm water through the unit
Shake to help remove any built up sugars and repeat as necessary
Wipe down and drain
At the end of trade, wipe down spout with a warm cloth for better hygiene
8-6-4 Way Black Backing Boards, 8-6-4 Way Free Standing Stands, Mounting Clamp, Rotating Lazy Susan, Replaceable Bulbs, Replaceable Body
These units are in our eyes the most reliable domestic unit on the market, they are worthy of been call commercial grade although are not trade weights and measures certified for commercial hospitality use within the Victorian State.
Please Check with your local trade weights and measure laws to see what is suitable for your purposes.
No customer reviews for the moment.